Websit: https://www.jmtornillo.com
Ahora me gustaría presentarles nuestro perno de paso
El perno de paso es ampliamente aplicado en las industría de TORRE Y POLO, energía eólica.
El mayor de Perno de paso que fabricamos son de tamaños 5/8×7”, 3/4×7 1/2”, 3/4×8” , grado ASTM A394 T-0, T-1 y el acabado galvanizado. Este es el Perno de paso galvanizado de grado ASTM A394 T’0, la marca está aqui.
Shanghai Jian&Mei es una empresa profesional que produce pernos, nuestro productos son aplicados principalmente en las areas Acero estructural, Edificio metal, Petróleo&Gas, Torre&Polo, Viento, Energía, Máquina mecánica, automóvil, Decoración etc.
Ofrecemos todos los tamaños.
El material sería acero al carbono, acero de aleación, acero inoxidable y cobre.
Grados disponibles de pernos son SAE J429 Gr 2,5,8, ASTM, A307,A490,ASTM A193 B7 and class 4.8 6.8 8.8,10.9,12.9,
El acabado sería Zinc, Zinc amarillo, Óxide negro, HDG etc.
Exportamos perno de paso con alta calidad al mercado américa más de 8 años y nos disfrutamos muy bueno reputación, somos su prroveedor reliable de elementos de sujeción.
No duden en contactarno en cualquier momento.
Shanghai Jian & Mei Industry and Trade Co., Ltd
Rm.27202, No.295 South Lingyan Road, Pudong,Shanghai,P.R.C, Code:200126
Tel: 0086-21-33328690-8058
Fax: 0086-21-68413263
English Web：www.jm-industry.com Websit: https://www.jmtornillo.com
Contact: Mrs.Xarella Huang
Email: Jminfo@jm-industry.com
Websit: https://www.jm-industry.com
To view this product go to:
https://www.carbatec.com.au/veritas-skew-rabbet-plane_c20446
Also known as a moving fillister, this rabbeting plane cuts quickly and quietly, avoiding the set-up, noise and dust associated with power tools. Like the Stanley #289 that inspired it, it is configured with a blade skewed at a 30° angle to reduce cut resistance, aid in shaving clearance, and help pull the fence tight against the workpiece. Because the blade sits flush with the side of the plane body, corner cuts are clean and accurate. Adjustable in two axes (vertical and horizontal) for depth and projection, the scoring spur sits ahead of the blade and is used to reduce tear-out on cross-grain work. The spur can be recessed for work with the grain.
The 7-3/8″ long fence is through-drilled to accept a wooden extension. Double guide rods and a special collet locking system prevent the fence from racking, and the large brass knobs allow fast and easy adjustments without tools. The fence can be positioned to allow a maximum rabbet width of 1-1/2″. The adjustable shoe controls the depth of cut to a maximum 3/4″ deep (or you can remove the shoe for no depth limitation), and has relieved edges to avoid marking your work. Supplied with a lapped A2 tool steel blade that is 1/8″ thick and just over 1-5/8″ wide. The depth-adjustment mechanism is fast and accurate, with an independent traveller to prevent lateral shifting of the blade. Set screws along the side allow repeatable blade positioning. The large wooden handles are solid and comfortable to hold. The 9-3/4″ long ductile cast iron body is machined with a 45° blade bed and weighs 3-1/2 lb. The plane is available in left- and right-hand versions. You may need only the version that suits your dominant hand, though neither model is exclusively for left- or right-handed users. They are in fact complementary since having both lets you accommodate any grain direction.