You need the following:
• Butter Knife
• Ruler
• Scissors or Craft Knife
• Ballpoint Pen
• Sellotape
• Lens Piece (supplied in your Nutri-Grain Pack)
DOWNLOAD THE NUTRI-GRAIN BOLT APP. SCAN THE QR CODE FROM THE FRONT OF THE PACK TO UNLOCK YOUR VIDEO BEFORE YOU START CUTTING.
STEP ONE:
Cut down the side of your Nutri-Grain pack to reveal the diagram printed inside.
Find the Top Adapter and pick the right one for your phone model, you only need one. If you have a Samsung Galaxy S5 you do not need a top adapter.
Run the back of the butter knife along all the DASHED lines. This makes it easier to fold them later.
Cut out all the pieces along the SOLID lines.
If you have an iPhone 4s, you need to also cut the SOLID lines on the tabs on Headset Body A marked iPhone 4s.
STEP TWO:
Using the ballpoint pen, poke holes through ALL the marked circles on Headset Body A and Headset Body B. Now insert your scissors into each hole made by the pen and cut out the notches.
You should now have all FOUR pieces cut out from your Nutri-Grain pack.
STEP THREE:
Lightly fold all the DASHED lines that you scored earlier.
Lay Headset Body A down flat on a solid surface. Take Headset Body B place over the top of Headset Body A as shown in the video.
Bring the pieces together, so the holes in Headset Body A and B line up. Sellotape the two pieces together along the top edge and the sides.
STEP FOUR:
Fold your Top Adapter. This piece helps to make your phone fit more securely. If you have a Samsung Galaxy S5 you do not need a top adapter and can skip this step.
It will start to form a rectangular box shape as you fold it. Sellotape it together to keep it secure and place into your headset as shown.
STEP FIVE:
Fold your nose piece in half. Sellotape the edges to keep the pieces together.
You now need to secure the Nose Piece into the headset. The tabs on the Nose Piece are marked to help you position it correctly.
STEP SIX:
It’s now time to insert the Lens Piece. Make sure the Nutri-Grain logo on the Lens Piece is facing towards you, as shown.
Push the unmarked tabs through the hole in the centre of the Lens Piece.
Carefully push the outer edges through the holes in the Headset you created earlier. Once the Lens Piece is positioned correctly, sellotape the Nose Piece tabs down to keep it in place.
STEP SEVEN:
Place your phone into the Headset with the screen facing upwards.
To keep your phone secure at the sides, fold the lines on the side flaps indicated for your phone model. If you have an iPhone 4s, you need to fold the tabs marked iPhone4s on Headset Body A inwards to hold your phone in the correct place.
You’re now ready to Experience Unstoppable!
Chevy Colorado Long Travel Suspension kit from DYNASTY OFF ROAD INNOVATIONS.
KIT SPECKS:
Will fit a 2.5 c/o and a 2.5 smooth body or a 2.0 bypass. you can also fit a single 3.0 c/o. We now use heims in our new upper arms for added adjustment and strength.
The kit pulls 18+” of travel (inner finder well modifications are required for 19-20″ of travel)
The kit includes:
Fabricated spindles, upper and lower laser cut control arms.
6- heim joints w/ misalignment spacers
4- 1″ uni-balls w/ misalignment spacers
2- Kartek 6″ limiting straps w/ mounting tabs
2- 6061 billet aluminum tie rods
2- D.O.T stainless steel bradded brake lines
8- Delron pivot bushings w/ inner crush sleeves
8- grade 8 allen metric replacement hub bolts
8- grade 8 hex standard bolts w/ nuts and washers (for kit assembly)
CALL: 951.660.1218
FOR PRICING AND AVAILABILITY.