LCD 3D Printer V5
Hardware:
- Raspberry PI 3
- LCD 5 inch 800×480 HDMI
- Drivers A4988 (Microstep=4)
- Stepper+threaded rod
- Matrix LED + controller
- power supply 5v 12V
- two metal rods
- magnets (HDD)
- Endstop
Software:
- NanoDLP – mode Movement GPIOs
Parameters:
- x/y 0.135mm
- Layer Thickness = 0.05mm
- Cure Time = 4 seconds
- Lift 6mm
- Daylight Resins (https://photocentric3d.com/)
- Blue led matrix