Note: This video was filmed around 2015, so some of the information is outdated. But we thought we would share the video anyway, so customers that are buying a used camper can at least have a basic idea on how the camper should be installed. Disclaimer* — This is a general overview of how we install our custom camper tie downs for Four Wheel Pop-up Truck Campers. Every truck camper installation is different depending on the truck and camper. This video is informational in nature and is intended for example purposes only. Accordingly, this video should NOT to be used as a guide for actually installing your truck camper (whether or not your truck camper was originally sold or manufactured by Four Wheel Campers, LLC (“FWC”)), and is not recommended for such use. Rather, you are responsible for using your own skill, judgment and experience in installing your truck camper. We do NOT recommend this camper tie down method for any other truck camper. Any use of this video in installing your truck camper does not guarantee that the installation of your truck camper will be safe, prevent losses or damage, or otherwise be error free. You agree not to rely on or to instruct or advise others to rely on this video when installing your truck camper. All risks associated with the use of this video is solely with you. Four Wheel Campers, 109 Pioneer Avenue, Woodland, CA 95776 (530) 666-1442 www.fourwh.com
The new spotlight support box TEKPF03A is able to solve a widespread problem to the installers: in fact they often used to be asked by their customers to light rooms with in-built spotlights, even if no false ceiling was available.
The workers could not find suitable framings (with appropriate diameters) and could not install them correctly, therefore the final result of the spotlight installation was almost always impaired so much as to damage the electricians work. Consequently they have always been very reluctant to accept such requests and have tried to avoid such type of installation as much as possible.
The spotlight support box is the right solution to all the troubles mentioned above and thanks to the specially provided applying tool it offers new job opportunities to the installers in the electric and lighting engineering sectors.
The spotlight support box is also suitable for house use. Considering the fact that the yearly Italian use amounts to a total of about one million items (mostly installed in commercial buildings where the use of false ceilings is more widespread), it is apparent that a simple, practical and inexpensive method which allows a proper installation also in private rooms such as corridors, bathrooms, stairwells, etc. gives a strong impulse to the market potentialities by offering excellent economic opportunities to every operator in the field.
The spotlight support box can also be used as a protective element for the spotlight during ceiling or plasterboard installations. This new special box (tekpf02) can be easily fixed to the spotlight by means of its specific configuration. This way, you can prevent the spotlight from being isolated under some probable thermal insulation of the false ceiling. Moreover, it is protected from dust and accidental schocks and so is the electric connection.
The element is characteristic to lodge electric or electronic variable diameter equipment from 50 mm to 105. The big versatility together with the simple and quick application system for the installation, allow a huge use above all into the civil buildings which do not have a false ceiling of:
-Built-in spotlights
-Loudspeakers for loud diffusions
-Anti theft sensors
-Smoke detectors
-Emergency lamps
-Methane gas detector
-Motorised telecameras.
These articles, if conformed to the use of our box could better suit for total built-in installation reaching aesthetic solutions more appreciated in the civil buildings.
We search for producers of the above-mentioned articles which believe in our product and wish to evaluate it to insert it in its accessories range.
Tekno soluzioni srl italy www.teknosoluzioni.it
Installation of the spotlights
using the spotlight support box TEKPF03
These support boxes are appropriate for the following installation type:
- in false-ceilings or walls in masonry or reinforced concrete
- for round small/medium spotlighs ( from 50mm to 150mm)
- for which you know at least aproximativelly the diameter
- When the coverage of the brick is made using plaster of about 1 cm thickness
- When the installation in reinforced concrete must be done at once or it is already finished
- It is possible to install them using the appropriate application system
INSTALLATION OF THE SPOTLIGHTS IN REINFORCED CONCRETE CEILINGS OR WALLS
During the phase of building design the spotlights can be positioned in reinforced concrete,
before it is finalised. For example, the spotlights can be installed in stairwells between floors,
or wherever the ceiling or floor is made specially to house the spotlights.
In this case as well, use the spotlight support box appropriately cut to the diameter of the hole and the support feet..
Nail the support box to the armour form in the place where the spotlight to be installed must be positio-ned.
Also fasten the box to the reinforcing rods and position the tubes for the electrical supply cables.
Before the drop, make sure any parts which should be protected from con-crete penetration, such as tube-box connections, are sealed.
Wherever it is necessary for this type of installation, seal the crack between the box
and the cover with silicone.
On removal of the form, the position of the spotlight hole can be identified by observing the two nails originally hammered in