Click this link to watch our latest all new Roasting Machine. https://www.youtube.com/watch?v=XhwqnqWPqII
https://www.aaram-engineering.com/index.php/products/nuts-roasting-machine.html
Our newly developed semi automatic Nuts Roasting Machine for small and medium scale industry. Very compact and efficient. Fully operated by electricity. No need for gas burner or other heating element.
Our Nuts Roasting Machine uses state of art technology that none other used. It blows hot air to roast the nuts. So the result is very uniform. This method keeps the aroma fresh and the discoloring due to heat is avoided. Air roasted will tastes better than flame roasted.
We tested this machine with Navathaniams (Ground nut, Peanut, Custard, Pepper, Wheat, most of the nuts family…) to roast, the result is unbelievable. Customers can use our Roasting Machine to roast almost any nuts.
Below are the list of items successfully roasted or dried with our roasting machine.
1. Cashew nut
2. Pea nut
3. Almond
4. Areca nut
5. Coriander seeds or Dhania or masala ongredients
6. Red chilli (dried)
7. Palm sugar ( to remove moisture)
8. Dried dates (used in mint fresheners)
9. Amla
10. Fennel
11. Green gram or Mung bean
12. Mung dhal
13. Channa dhal
14. Fenugreek
15. Rice flour used for Idyappam & Puttu
16. Wheat & flour
Specification :
Machine capacity 5Kg or 10Kg per loading.
Roasting time for cashew nut (size 600) is about 25mins
Stainless steel mixer
Equipped with digital timer and temperature controller to suit roasted nuts
Operating voltage 230V AC Single phase
Power consumption 2.5KW/hr
Salient features :
Comes with digital timer and temperature controller, so no need for operator to monitor the operation. Just load it and let it run, once finished it will beep for 15secs.
The rotation cycle of mixer is also adjustable depends on the nuts to be roasted. Either fast or slow, rotate for how long and stand still for how long, all the parameters can be adjusted by the simple control knobs provided.
Feel free to contact ,
Ph: +91 77080 25101
email: sales1@aaram-engineering.com
The heads are ready for the 4.8 flat top pistoned 5.3 that is going into the ’87 Chevy Truck. These 862 cast heads have been fully home ported and used 2″ LS1 intake valves installed.
These heads were not flow tested, but I expect them to flow a little better then LS6 243 cast heads as my past heads have done.
I made the decision to run the 2″ valve because it was used so often in other LS motors and even in the HO5.3 with 243 heads, which is basically what I’m coping here.
I measured the throat and all diameters of the 5.3 valve seat vs the ones in a pair of LS1 heads. They came out to appear to be the same valve seat.
Springs are PAC 1218 .600″ Lift. Link below:
https://www.briantooleyracing.com/600-lift-pac-1218-beehive-valve-springs.html
Comp 511-16 Valve Stem Seals Here:
https://www.summitracing.com/parts/cca-511-16/overview/
UPDATE:
The heads were later pulled off of the truck and milled .045″ to achieve 11.4:1 Compression Ratio.