Departmental Procedures & Guidelines for Inspections, Certifications, Load Testing, Repairs & Painting of Fire Escapes
Inspections by Structural Engineers, Fire Escape Engineers or others acceptable to the Official:
In layman’s terms, the city official is looking for a registered structural engineer or others qualified and acceptable by the Fire/Code Official to do a Critical Examination in lieu of a Live Load Test (criteria submitted or discussed prior to inspection) and issues written verification and certification that all connections are free of internal rust or rot as well as all original hardware (square head bolts or rivet) are reinforced and or replaced in lieu of Live Load Test. All supports (thru-bolts or cemented) into the wall must be verified and certified in lieu of Live Load Test. A fire escape confidence test and tag must be submitted if fire escape passed. The report with photos identifying violations for repairs must include repair criteria submitted to the official for repair vendor to use as a guide during and with engineer oversight of permitted repairs. A Fire Escape Confidence Test and tags identifying certified condition are then submitted. Recommended cycle for live load testing is 20 yrs after total refurbishment or as required by official.
Repairs by Ornamental Ironworkers, Welding Companies or others acceptable to the Official:
In layman’s terms, the city official is looking for a qualified licensed repair vendor to do all work under repair permit (if required) with engineer oversight of repair criteria submitted for approval to the official in lieu of Live Load Test. All connections must be free of internal rust or rot, spot primed and sealed. All worn material repaired and or replaced. All supports into wall reinforced, repaired and certified in a Fire Escape Confidence Test. In lieu of Live Load Test, all square head bolts, rivets and or welded connections must be certified, reinforced and or replaced based on age or condition. All ladders and cantilevers must be balanced and drop 2-3 ft per second, hit the ground and stay down and must lead to a public way. All roof ladders must be secure. No full painting of any fire escape until all spot painted repairs are inspected and certified under engineer oversight and or city official permit sign-off. Full replacement is subject to permits and or possible code upgrade requirements.
Painting by EPA Licensed Renovators (if lead paint is present) or others acceptable to Official:
In layman’s terms, the city official is looking for a paint vendor (EPA Certified Renovator if required) to do all work as per EPA Guidelines due to the fact that all fire escapes older than 1978 are presumed to have lead (EPA) unless identified as no lead or low lead by a licensed lead inspector. Entire building will be notified with signage and all precautions shall be taken to collect paint chips at grade. No sandblasting or power assisted scraping without full fire escape encapsulation under EPA Guidelines. All major connection shall be sealed from water intrusion before during or after painting. All escapes should be spot painted every 3-5 yrs and fully painted every 5-10 yrs or as needed or ordered by a Fire/Code Official.
Fire Escape Codes:
MASS BUILDING CODE 1001.3 TESTING AND CERTIFICATION ALL EXTERIOR BRIDGES, STEEL OR WOODEN STAIRWAYS, FIRE ESCAPES AND EGRESS BALCONIES SHALL BE EXAMINED AND OR TESTED, AND CERTIFIED FOR STRUCTURAL ADEQUACY AND SAFETY EVERY FIVE YEARS, BY A MASS REGISTERED PROFESSIONAL ENGINEER, OR OTHER QUALIFIED AND ACCEPTABLE TO THE BUILDING OFFICIAL, WHO SHALL THEN SUBMIT AN AFFIDAVIT TO THE BUILDING OFFICIAL.
NFPA Lifesafety Code 101 7.2.8.6.2 The authority having jurisdiction shall be permitted to approve any existing fire escape Stair that has been shown by load test or other satisfactory evidence to have adequate strength.
For more information please visit our website at https://fireescapeengineers.com or call 866-649-0333
Fire Escape Engineers is an approved member of the Fire Escape Services Network https://www.fireescpeservices.com and a founding member of the National Fire Escape Association (NFEA) https://www.nationalfireescapeassociation.org
Chemical anchors is a kind of professional fixing system for general fixings with loading capacity or structure reinforcement of infrastructure.
The installation process will affect the bonding performance of chemical anchors.
- Drill the specific diameter and depth on solid bases.
- Clean the dust and debris out of the drilled hole by blower and brush. The dust will lower the bonding of adhesive and concrete.
- Press out the unmixed resin which can’t be used.
- Inject the mixed resin in the drilled hole from the bottom to 2/3.
- Insert and rotate the threaded rod in the drilled hole.
- Don’t touch until full curing.
We are a Taiwan manufacturer of chemical anchor for 20 years. Chemical anchors is a professional fixing system which is more stronger than mechanical fixings like wedge bolts, expansion anchor. It can increase the bonding strength of the fixings. Widely apply for general fixings, structure reinforcement, rebuilding.
Why choose Good Use Chemical Anchors?
- 20 years OEM (customized label) experience and export worldwide. Agent agreement in some countries and distributors all over the world.
- All made in Taiwan, quality guarantee.
- Competitive price for high quality
- Keeping improving on quality and customer supports
- REACH Compliance
- CE & ICC certificate in the process
Please feel free to visit our webite, https://www.gooduse.com.tw for more details. We will be your reliable partner.