Slammed S2k can have premature axle life span. Check out the video to see why. Below is manufacturer specs from their website.
When lowering a S2000 , its driveshaft angle will definitely need re-adjustments due to the modifications applied, in this case, the lowering of the suspension. This is due to the fact that lowering a S2000 creates unwanted space in between the driveshaft roller and spider (inside of the driveshaft), causing the inboard joint to unevenly wear out. With the installation of T1R Half shaft spacers, it will prevent the driveshaft from losing its regular position and it is highly recommended for any lowered S2000.
Made out of CNC machined Forged Aluminum for strength and durability. Comes with HIGH-TENSION STEEL bolts and nuts. Special innovative design for easy installation unlike other brands that required to remove the entire driveshaft.
Recommended for high performance street driving, Auto-X and racing.
Recycling Wine Bottles with a Home Made Wine Bottle Cutter.
You can follow us on Instagram https://www.instagram.com/craftbytwo/
Part List:
1- 2 X pieces of wood board, unplained as you need the friction between them
2- 3 X 8MM Bolts, 3 CM in length
3- 3 X Washers
4- 3 X Nuts
5- 3 X Skateboard bearings or similar bearings
6- 4 X L-Brackets, 5 CM each side
Tools you’ll need
1- A Grinder or a Metal File
2- 8MM Drill Bit
3- Power Drill
4- Flat Blade and Philips Screwdrivers
5- Glass cutting Diamond, the cheap kind