Install Gearshift Housing on Case. Place the transmission in neutral position. Lay the shifter shaft plate on the pivot and on the shifter shafts. Lay the spring washer on the pivot. Place a new gearshift housing gasket on the case. There are those we disagree with this and insist the correct procedure is to lay the spring washer down first and then the pivot plate. Lay the housing on the transmission and install the four lock washers and cap screws in the housing. If you will not be immediately mating the transmission to the transfer case reinstall the retaining wires to prevent the mainshaft from slipping out of place.
Pneumatic marking machine is a kind of used in the industries of steel pipe, pipe for traceability code label of the device