I made some changes to my propane burner for my foundry. Alex and I explain what changed, and why. There are also a few nice demonstrations of its awesome power! It’s made from a gas regulator hose, two pieces of 3/8″ x 3&4″ pipe, a ball valve, a 1/2″ bolt, and a .030 MIG welding tip. The burner tube that surrounds all this is a 1.25″ x 12″ pipe, and 6 socket head cap screws are used to position the propane pipe inside the burner tube.
Visit https://www.benzbonz.biz/store for Quality Pre-Owned Mercedes Parts.
If you ever have worked on cars, you have experieced a rounded out allen bolt head. Allen bolts get rounded out because
a) All the crud inside the bolt head wasn’t removed before attempting to remove the bolt
b) The Allen wrench wasn’t completely perpendicular to the Hex head
c) The Allen wrench being used is rounded out (Bad tool)
d) Not enough force was used to keep the Allen Wrench inside the head.
Either way, your hosed. Here’s the easiest methof of removing that bolt.
Same procedure works for hex head bolts.