Sliver or Tin Plated Brass Set Screws Grub Screws
Metric Size: M1.4 - M52, Inch Size: 0# - 2"
Hexagon Socket(Allen), Torx Star, Square, Slotted Drive Types
Flat Point, Cup Point, Cone Point, Dog Point
Other Drive and Point Type are also available acc. to customer requirement
Various Surface Finishes
Various Material Grades are available
Please feel free to contact us for more details
RIVKLE® Elastic consists of a metal body with a metric thread (in most cases) and a wrapping of elastomer or thermoplastic elastomer.
This fastener is an innovative solution when a high-strength thread body must be fastened to a thin-walled component. It is additionally proven by its noise and vibration-decoupling properties.
How do you use sae flanges? What do you need to take note of for correct and safe installation? https://www.chuankok.com/sae-flanges.html
SAE flanges are made to ISO 6162/J518 standards and are commonly called SAE 61 or SAE 62 High Pressure Pipe Flanges. In order to use SAE flanges properly, there is a 4 step process as per described in the video.
Step 1:
Ensure the sealed surface are free from scratches and contamination.
Lubricate with system fluid or any compatible lubricant on the surface of O-ring portion.
Step 2:
Position the flange.
Place the washer on cap screws and bolt through the bolt holes.
Step 3:
Tighten the cap screws by hand.
Torque the cap screws gradually in diagonal sequence till the appropriate torque level based on below torque table.
Step 4:
Tighten the cap screws according to the below torque table.
To learn more about Chuan Kok, please visit the following
Website: https://www.chuankok.com
Facebook: https://facebook.com/chuankok
Youtube: https://youtube.com/c/ChuanKokSg1982
Google+: https://plus.google.com/+ChuankokSg1982
Phone Number: +65 6294 2566