Stainless Steel Set Screws Grub Screws
Metric Size: M1.4 - M52, Inch Size: 0# - 2"
Hexagon Socket(Allen), Torx Star, Square, Slotted Drive Types
Flat Point, Cup Point, Cone Point, Dog Point
Other Drive and Point Type are also available acc. to customer requirement
Various Surface Finishes
Various Material Grades are available
Please feel free to contact us for more details
TRITIUM ELECTRONICS
SUPERB HIGH END TURNTABLES, INTERCONNECTS, TRIPHAZERS
SEE WWW.BEERCITYAUDIO.COM FOR DETAILS
https://www.mediafire.com/?bge14488efm81 COOL SONGS
WATCH IT TO THE RUN OUT GROOVE..
WWW.BEERCITYAUDIO.COM
TRITIUM AIR BEARING ULTIMATE VISCOUS DAMPED TONEARM & TURNTABLE.
Viscous damped in the vertical as well as horizontal plane.
Damping takes place at the headshell for maximum control.
Undamped tonearms have a very colored presentation from vibrations set up by the needle.
Their sound is far from what is possible from the Vinyl LP format.
Undamped or rear damped tonearms are not even close in terms of fidelity, tracking and Vinyl wear.
The Tritium Tonearm is a perfected design for Medium to High compliance cartridges and gives about a 10 to 12 hertz tonearm resonance frequency.
Tonearm weighs about 34 Grams with this 8 gram cartridge and has a 10 hertz arm resonance frequency.
We have a Sumiko Blue Point Special cartridge with over 5,000 playing hours on it and a Shelter with 3,800 hours!
With no visible wear under a 700 power Stereo microscope
AMAZING… !
Lowest Mass, Lowest Wear, Highest trackability, Highest compliance tonearm in the world.
( OTF VTA ) ON THE FLY Vertical Tracking Adjustment is a screw found on top of the Tonearm pivot.
-COMPLETELY FRICTIONLESS for the MOST ACCURATE LP PLAYBACK EVER-
NO pivoted or linear arm design available can compare!
33 RPM, 45 RPM and Optional 78 RPM
Tritium Air Bearing Turntable
OWN THE ULTIMATE TURNTABLE!
The culmination of 30 years of research and development results in this superbly designed turntable for a lifetime of musical pleasure! Comprised of the ultimate precision machining unmatched in performance.
TONE ARM ASSEMBLY:
- The lightest, strongest, least resonant and most accurate tracking pickup arm ever made.
- Tone arm moves effortlessly in horizontal and vertical directions with 5 to 12 PSI of compressed air and is damped by a Synthetic viscous fluid.
- It is COMPLETELY FRICTIONLESS!
PLATTER ASSEMBLY:
- Precision designed to damp out disruptive energy!
- Platter has a layer each of Aluminum and Brass with a Copper top platter mat.
- Suspended on a Brass/Bronze ball bearing and nylon thrust pad for smooth operation.
- Rotor is designed with a .017″ slope to remove record warps and virtually eliminate all subsonic wow.
PLINTH (BASE) ASSEMBLY:
- 2-piece base comprised of 70 lb 1.2″ Aluminium plates.
- Layer of ISO-DAMP compound between the layers to dampen and absorb incoming and outgoing vibrations to very low levels.
- Plinth rests on 4 adjustable brass leveling Tip Toes.
MOTOR:
- Pulley is precision machined for accurate 33 or 45 RPM playback.
- The High Torque Aluminum motor with a brass base.
- Alinco 48 pole, Synchronous hysteresis, 115 VAC, 600 rpm, 1/150 HP. Motor
Included:
- Polished Brass and Copper Record Weight with a nylon insert for quiet spindle touchdown.
- Phono Output Connector Box is a machined aluminum billet with gold RCA connectors and a ground connector.
- High torque belt drive.
- Tritium logo on plinth.
- Quiet Gast air pump, Surge tank, 100 feet air tubing
-Aluminum Table with adjustable feet
TRITIUM AIR BEARING TURNTABLE COPYRIGHT (C) (P) 2000-2014 WWW.BEERCITYAUDIO.COM
Find more information about “Cobra Engineering – 3-inch Slip-On Mufflers (Honda’s VT1300 Sabre, Stateline, Fury and Interstate)” on the Dennis Kirk website: https://bit.ly/Qs8MB6
Overview of Cobra 3 Inch Slip-On Mufflers
• 3 inch chromed muffler body
• Repack to tune the sound
• Radially slashed, chromed billet tips
• Rotate to three different positions
• OEM-style cross-over on models that came stock are included
• Also includes 2 inch baffles and will fit stock head pipes
• Easy to install using stock mounting brackets
• Made in the U.S.A.
NOTES: Not all products are legal for sale or use on pollution controlled vehicles. Check your local laws and manufacturers information.
Included Items:
(1) Front muffler body
(1) Rear muffler body
(1) Small hose clamp
(1) Large hose clamp
(1) Front heatshield
(1) Rear heatshield
(2) M8x12mm Hex flange bolts
(1) Instructions
Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product. If a jet kit or fuel processor is recommended, see the Intake/Fuel section.
Exhaust discoloration (bluing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.