ASTM F912 F912M Alloy Steel Socket Set Screws Grub Screws
Metric Size: M1.4 – M52, Inch Size: 0# - 2"
Hexagon Socket(Allen), Torx Star, Square, Slotted Drive Types
Flat Point, Cup Point, Cone Point, Dog Point
Other Drive and Point Type are also available acc. to customer requirement
Various Surface Finishes
Various Material Grades are available
Please feel free to contact us for more details
https://chevroletforum.com/how-tos is the leading Chevy Silverado resource for technical DIY guides. If you’re ever stuck in the mud, you’ll be glad there are tow hooks on your truck. Learn how to install them easily with help from this video. For the full step-by-step article, please visit https://chevroletforum.com/how-tos/a/chevrolet-silverado-2014-present-tow-hook-modification-how-to-install-tow-hook-389639
Depending on which model Silverado you have, the holes needed to install a set of tow hooks might already be drilled. If they are, then installation is very simple and requires only a socket or wrench set at most. The process may also require removing the air dam or bumper, or even cutting holes in the bumper to install.
This moderately difficult job takes one to two hours and costs from $15 to $500 dollars depending on which tow hooks you purchase. A professional may charge anywhere from $100 to $1,000 dollars.
This job requires a socket or wrench set, Loctite, and tow hooks. Optional materials include a marker or paint stick, rotary tool or saw, and a drill.
Step One – Determine if modifications are needed
Depending on what sort of tow hooks you choose, the factory openings on the bumper may be sufficient.
Measure the area and determine if any cutting or trimming is necessary to make the hooks fit. If necessary, mark the area to cut and trim it.
Step Two – Install the tow hooks
Slide the tow hooks into place and line them up with the bolt holes on the frame.
If you don’t have factory bolt holes, you will need to mark this area and drill them. In some cases, the bolt holes may not be big enough and must be drilled out to fit.
Once completed, squeeze a line of red Loctite onto the bolts and install them. Install the chain hold down bracket onto the bolts, followed by the washers and nuts.
Tighten according to the torque specs in the manual that comes with your tow hook.
Placing a BoltShield 1.1/2″ size made of carbon steel on B7 stud bolt+ Gr. 2H nut + washer