Learn how to install metal storm shutter panels with this helpful how-to video from Lowe’s. Aluminum hurricane shutters are a great choice due to their strong, lightweight design that are quick and easy to install. Once you install the metal storm shutter track, you can easily remove and re-install your storm shutters whenever needed.
Start off by measuring each window opening dimensions. When you have all of the measurements, take them to your local Lowe’s and ask an associate whether stock panels will work or if you need to order custom storm panels. It is also important to get the correct type of mounting hardware depending on if you have a wood, brick or block exterior.
You can use build-out tracks or mount the panels horizontally. On the build-out track, mark centered holes 3″ from each end and every 6″ in between .Then drill the holes and mark the center of each piece. Mark a 6″ vertical marks center on your house above and below the window sill. Secure the header with a concrete screw, level and add the other screws. A watertight seal can be achieved with a line of caulk. Attach the bottom track, and then you can start inserting the metal panels.
Find everything you need for hurricane preparedness at https://www.Lowes.com/Hurricane
Subscribe to Lowe’s YouTube: https://www.youtube.com/subscription_center?add_user=lowes
Or head to our channel: https://www.youtube.com/Lowes.
PEDRICK Tool and Machine Company, Inc. manufactures their Model A-7 to bend rectangular bar stock the hard way for seismic pipe hangers (see video), fences, structural components, agricultural equipment, solid round bar stock for eye bolts, ground anchors, anchor bolts, U bolts J bolts, concrete reinforcing bar (rebar). This video shows the Model A-7 bending .125 IN X 1 IN solid rectangular bar stock to a 3 IN inside radius, 0-180 degrees, 5 pieces at a time. The distance between the legs is critical. Test bends were performed to adjust the die for radial spring back. It has the capacity to bend 1.75 IN OD solid round, A36, bar stock for anchor bolts. Anchor bolts are used in many construction applications. Seismic pipe hangers are manufactured in multiples on a Pedrick Tool and Machine Co., Inc. Model A-7 bending machine