Customer Testimonial:
I just wanted to tell you about a repair that I made that I probably never would have even attempted without your SSF-6 Silver Solder. I have attached some before and after photos.
My customer sent me a cast iron body carburetor to repair that had a piece broken out of the casting at the threaded hole where the inlet fitting screws into. It was a 1/8 NPT fitting, and someone had just tightened it too much and broke the casting. The broken piece was long gone. Someone had previously tried fixing it with epoxy, but it had ultimately failed.
I clamped the casting into a large vise to act as a heat sink, and using a #3 torch tip, built up the area with SSF-6. After cooling for about 2 minutes, I carefully unscrewed the bolt. It had left almost a perfect set of threads in the SSF-6.
*Note: An oxyacetylene torch is required for cast iron repairs with SSF-6
Please read all instructions prior to use at: https://www.muggyweld.com/wp-content/uploads/2017/04/SSF-6-instructions.pdf
For more videos and information, or to order, visit https://MuggyWeld.com
International customers, please order at: https://www.ebay.com/usr/muggyweld
_________________
Please visit https://www.aws.org/technical/facts/ prior to using Muggy Weld products, and adhere to all AWS welding safety guidelines. Further product safety information is available at https://muggyweld.com/safety-guidelines.
Muggy Weld LLC shall not be liable for any loss, injury, claim, liability, or damage of any kind resulting in any way from (a) your use of this Site, (b) any services or products obtained from this Site, (c) any errors in or omissions from this Site, (d) the unavailability or interruption of this Site or any features thereof, (e) any content contained on this Site.
MSDS sheets available with purchase from MuggyWeld.com, upon request.
The Super Full Function Channel Letter Bender (TPS-S9700) is the most advanced fully automatic channel letter fabrication machine for the sign-making industry, which could bend aluminum profile, stainless steel with high quality. TPS-S9700 Automatic Sign bending machine is based on precise mechanical construction and a unique retractable alternating bending mode, use Pre-feeding leveling, clamping alternate feeding, and driving with double lead screw thumbs for slotting. With the special bender design, almost every kind of material(aluminum profile, stainless steel, aluminum coil, galvanized steel, brass, bronze etc al) is support. Based on years of experience in the development of channel letter bending equipment, the TPS-Auto Bend control system can ensure the letters processing precision, especially fit for making letters with small radian, small angle and complex graphics. It is high-end equipment for making LED signs, Steel letters, channel letters and Epoxy letters.
A new type of aluminum profile is supported, which can make the manufacturing of channel letters very easy. After bending finished, only an air nailer is needed to fix the face plate (Polycarbonate) and the aluminum profile. With this new process, you can save more time than ever.
Features
■ Software support: Input with DXF/PLT files, support AUTOCAD, TYPE3, CORELDRAE, ILLUSTRATOR, etc.
■ Artificial intelligence function automatically adjusts the bending angle and speed according to the designed shape and length
■ Function: V-Slotting, Bending, Cutting Angle(Controlled by CNC)
■ Low slotting cost, One V-Slotting tool can be used for half a year (about $25 each tool)
■ Low slotting cost, One Cutting Angle tool can be used for half a year (about $30 each tool)
■ Control Software update are free
■ Could be used for Galvanized steel channel letters, Epoxy channel letters, Stainless steel channel letters, Brass letter , Bronze letter, Aluminum letter
■ Support Windows 2000, XP, Windows 7
Technical Parameters:
Contents Parameters
Power supply AC200V
Total Power 3.5KW
Compressed air 0.6-0.8Kg/cm2
CNC Control axis number 7
Min. Bending radius Stainless steel R7.5mm, Aluminum Profile R17.5 mm
Min. distance between interior angle and exterior angle Stainless steel 4.5mm, Aluminum Profile 15mm
Bending distance from start : Stainless steel 3mm, Aluminum Profile 10mm
Materia:l Aluminum Profile ,Stainless Steel, Galvanized Steel, Brass, Bronze, Aluminum coil
Material thickness 0.6-1.0mm
Material height Stainless steel 20-120mm, Aluminum Profile26-100mm
Material feeding method Clamping alternate feeding
Servo Motor 3PC
Step motor 5PC
N.W. 600Kg
Size 2750×1600×930mm