Nylon Patch Socket Set Screws
Metric Size: M1.4-M52, Inch Size: 0# - 2"
Various Drive and Point Types
Various Surface Finishes
Other Material Grades are available
Please feel free to contact us for more details
***VISIT OUR SPONSORS***
https://www.traderadiators.com | https://www.grahamplumbersmerchant.co.uk | https://www.buteline.com/uk | https://www.adey.com
How push fit fitting work. Hepworth Hep2o Where to buy them online. For more plumbing tips and advice visit our website at https://www.plumberparts.co.uk
Hello. This instructional video will show you how a push fit fitting works and how to install
one. Let’s look how the push fit fitting is assembled. There is the main
valve body the rubber seating washer,
the washer jumper that holds the rubber washer in place, the pipe clamp that holds the pipe in place and the end nut that holds all this tightly together in one piece.
The rubber washer is first inside the fitting, then the washer jumper,
the pipe clamp and finally the end nut.
If we look closely at the pipe clamp we can see
it has metal teeth that grip the pipe one way so you can push it on the
pipe but not pull it off. Push fit
fittings can be used on both copper and plastic pipe. Plastic pipe
requires a small metal sleeve to be inserted into it. This prevents the
pipe from collapsing. Push the nut over the pipe and fully insert the pipe into the fitting.
Tighten the nut. If we remove
If we remove the pipe from the fitting we can see that the rubber sealing washer is successfully around the pipe creating a
watertight seal. And that’s how
push fit fittings work.
MST draining and new welding wire brand