Use of steel inserts for ROBUD STAYER formwork system assembling
www.robud.info
Here is one option to adding a Cable Attachment to your Power Rack. I will also have another one soon where I welded certain parts to this Attachment for those who are interested in that.
Also, here is the UPDATED list of items needed for this project….
14′ of 1/4 ” Vinyl wrap steel cable
6 1/4″ cable clamps
4 1/4″x4 bolts
4 1/4″ nuts
8 1/4″ washers
6 1 1/4″ #8Torx wood screws
4 3/4″ x 1/4″ sheaves
4 1/2″ x 1/4″ Bolts
4 1/4″ Nuts
2 2″ Overhead Pulleys
2 1 1/2″ Overhead Pulleys
2 Snap Spring Clips 4″
1 7/16 x 3″ U Bolt
4 7/16 nuts
Drill
1/4″ Drill Bit
7/16 Drill Bit
In addition, to properly install the cable clamps, make sure the saddle of the clamp ( the part where the nuts are ) is on the long ( live ) end of the cable. All should be facing the same direction to ensure proper strength. Sorry about that!