In this episode of Chemical Guys Tech Talk, we show exactly how to install our Chemical Guys 3.5inch backing plate on the Porter-Cable 7424xp Dual Action Polisher. In the a matter of seconds, you can take your dual action polisher and equip the machine with a Chemical Guys Hex-Logic 4inch polishing pad to easily polish all those smaller areas on a vehicle. Easily polish headlights, door jams, mirrors, and any smaller areas of the vehicle with the Chemical Guys 3.5inch Backing Plate and Hex-Logic 4 inch polishing pads on your Porter Cable 7424xp dual action polisher.
https://www.chemicalguys.com/Backing_plate_for_your_Dual_Action_Polisher_p/buflc_bp_da_3.htm
Professional grade OEM molded urethane backing plate.
THE BEST 3 1/2″ Backing plate for your Dual Action Polisher. DA-Molded urethane backing plate. Nothing holds pads better then our Hook & Loop flexible backing plates.
Chemical Guys Dual-Action Flexible Backing Plates minimize heat transfer, while it flexes just enough to contour to your autos bends curves. These backing plates are built tough and even carry a 1 Yr warrant. Ideal for use with Porter Cable 7424 Dual-Action Polisher or Chemical Guys Heavy Hitter DA.
Why get a molder urethane backing plate as apposed to some cheap shit you saw on line? Urethane is flexible and very durable. Reinforced inner construction utilizes steel struts molded into the center hub to give the plate stability while maintaining a great even surface for pads.
Dual-Action Flexible Backing Plates minimize heat transfer
Molder Urethane is flexible and bendable to work well with vehicles curves,
best backing plates for Porter Cable 7424 or 7336 Dual-Action Polisher
flexible and incredibly durable
build to last through countless, rigorous uses without falling apart or becoming unbalanced.
3.5″ Inches in Diameter and is perfect for all 3.5″, 4″ and 5″ Spot Buff Pads.
The backing plate is smaller than the pads to allow a generous lip of foam to protect the paint surface. Even if you turn the pad onto its side accidentally, there is an inch of soft, beveled urethane between the edge of the plate and the inner construction. The threaded post fits any polisher with a 5/16″ diameter.
Use the backing plate preferred by some of the leading car manufacturers in the world to put the final touches on their vehicles. Our Dual-Action Flexible Backing Plate provides the safest, most durable surface for your pads so that you get the best performance possible from your dual-action polisher.
Visit https://parts.rheem.com to buy manufacturer authorized parts for Rheem, Ruud, Richmond, Marathon, Eclipse, Vanguard, Hotpoint and General Electric (GE) water heaters. We also offer many universal parts designed to fit most other brands of water heaters.
Changing the anode rod every four years is a great way to extend the life of your water heater. The anode rod is a special metal component that’s meant to slowly dissolve so that the tank itself doesn’t corrode. When the anode rod is depleted, it no longer offers corrosion protection for the tank. To avoid tank damage, it’s best to replace the rod before that happens.
We offer anodes made from magnesium and aluminum, available in various lengths. Aluminum rods are available where sulfur odor or “rotten eggs smell” is a problem. Flexible rods are available where overhead space is tight for installation.
This video shows detailed step-by-step procedure for how to replace an anode rod on a gas or electric hot water heater.
Tools you’ll need
A ratchet wrench
A 1 1/16-inch socket
A 24” cheater bar or pipe
A Flat Blade Screwdriver
Teflon tape
A 2-gallon bucket
Hack saw
WARNING: For your safety, be sure to carefully read and understand the manufacturer’s Use and Care Manual, in its entirety, prior to operating, repairing or adjusting the water heater. Failure to do so may result in fire or explosion, electric shock, property damage, personal injury, or loss of life. If you do not understand these instruction or any terms within them, please contact a qualified service professional. Prior to starting any repairs or service on your water heater, please thoroughly read the Use and Care Manual provided with your water heater. If at any time you are unsure or uncomfortable about the suggested repair or service discussed herein, stop any activity and immediately contact a licensed plumber.