2017 New Style ASTM A325M 8S Heavy Hex Structural Bolts for Portugal Manufacturers

ASTM A325M 8S Metric Size Heavy Hex Structural Bolts The bolts are intended for use in structural connections. These connections are covered under the requirements of the Specification for Structural Joints Using ASTM A325 Bolts, approved by the Research Council on Structural Connections, endorsed by the American Institute of Steel Construction and by the Industrial Fastener Institute.   Dimension: ASME/ANSI B18.2.3.7M Thread Size: M12-M36 with various length Grade: ASTM A325M Type-1 Grade Marking: A325M 8S Finish: Black Oxide, Zinc Plating, Hot Dip Galvanized, Dacromet, and so on Packing: Bulk about 25 kgs each carton, 36 cartons each pallet   Advantage: High Quality and Strict Quality Control, Competitive price,Timely delivery; Technical support, Supply Test Reports Please feel free to contact us for more details.  

  • 2017 New Style ASTM A325M 8S Heavy Hex Structural Bolts for Portugal Manufacturers Related Video:



    Thirty years ago, John McDermott and John Wren were young daredevils in need of union benefits, so they signed up for one of New York’s most dangerous professions: high-rise-window washing.

    Still haven’t subscribed to The New Yorker on YouTube ►►

    https://bit.ly/newyorkeryoutubesub

    CONNECT WITH THE NEW YORKER
    Web: https://www.newyorker.com
    Twitter: https://twitter.com/NewYorker
    Facebook: https://www.facebook.com/newyorker
    Google+: https://plus.google.com/+newyorker
    Instagram: https://instagram.com/newyorkermag
    Pinterest: https://www.pinterest.com/thenewyorker
    Tumblr: https://newyorker.tumblr.com
    The Scene: https://thescene.com/thenewyorker

    Want even more? Subscribe to The Scene: https://bit.ly/subthescene

    High-Rise-Window Washers of Manhattan

    Director: Keven McAlester
    Producer: The New Yorker



    “This video is copyrighted material of Nissan North America, Inc. and should not be copied, edited, or reproduced without the permission of Nissan.

    For information please visit https://owners.nissanusa.com/nowners/. You will find quick reference guides and other useful information about your warranty, Bluetooth® system, and much more!

    Your vehicle is equipped with an intermittent windshield wiper system. This lever is used to control all windshield wiper and washer functions
    To operate the intermittent windshield wiper system, your ignition must be ON.

    Push the lever down to the first stop for intermittent operation. To increase or decrease the wiper speed, rotate this ring.

    Intermittent operating speeds vary according to your vehicle speed. At a higher vehicle speed, for example, the intermittent operation will be faster.

    Push the lever down to the second stop for continuous low-speed operation or down to the third stop for continuous high-speed operation.

    In conditions of mist or light rain, push the lever up to MIST and you’ll get a one-sweep operation of the wipers.

    To clean the windshield, pull the lever toward you and hold. Washer fluid will spray and the wipers will automatically sweep several times.

    The wiper will also operate once to wipe washer fluid that has dripped on the windshield.

    To replace the wiper blades or clean the lower windshield, the windshield wipers must be in the service position. With the ignition switch in the ON position or within 60 seconds of placing the ignition switch to the OFF position, lift up on the windshield wiper and washer lever two times in less than 0.5 seconds. The wiper operation stops in mid-operation. The wiper arm can then be pulled away from the windshield for replacement or cleaning. To move the wiper blades back to the original position, Push the windshield wiper and washer lever up for more than 1 second or push the lever down to operate at any wiper speed.

    To operate your rear windshield wiper at a preset intermittent speed; turn the knob on the end of the lever to INTERMITTENT.

    For continuous operation, turn this knob to ON. Turn the knob to the OFF position to turn the rear windshield wiper OFF.

    To clean the rear window, push this lever FORWARD. Washer fluid will spray and the wiper will automatically sweep several times and stop.

    Please see your Owner’s Manual for important safety information, system limitations and additional operating information.