2017 Good Quality Segment Bolts for Construction Machinery for Jeddah Manufacturers

Professional manufacturer of Segment Bolts with Nuts, feature a hexagon or D shape head, secure the sprocket segments in crawler equipments. Normally the diameter of unthreaded body is bigger than thread.   Fit for Caterpillar, Volvo, Doosan, Komatsu, Komelco, Ajax, JCB, BYG Inch Size: 3/8”-1.3/8” with various lengths Metric Size: M10-M36 with various lengths Grade: SAE J429 Grade 5, 8; 170 KSI, 180 KSI; ISO 898-1 class 8.8, 10.9, 12.9 Finish: Plain, Black Oxide, Zinc Plated, and so on Packing: Bulk about 25 kgs each carton, 36 cartons each pallet Advantage: High Quality and Strict Quality Control, Competitive Price,Timely Delivery; Technical Support, Supply Test Reports Please feel free to contact us for more details.

  • 2017 Good Quality Segment Bolts for Construction Machinery for Jeddah Manufacturers Related Video:



    Tests of output volts and amps produced before and after removing the blinking LED. Both overcast sky and bright sunshine. I hook up a DC to DC Buck Converter and explain it a bit. I run a USB charging port, I charge a camera and a cell phone. I use the panel to make a batch of colloidal silver. I test the panel with a simple solar charge controller. I charge a 12v- 3ah lead acid battery. This solar panel is not weather proof because it’s designed to be used on the dash of an enclosed vehicle.

    Here’s a link to the product web page: https://www.harborfreight.com/15-watt-solar-battery-charger-68692.html
    Be sure to read the reviews to get a more well rounded understanding of this product.



    Today we’re going to show you how to remove the front seat of an Audi A4 B6/B7.

    Step 1: Move the seat to the most forward position possible
    Step 2: Tilt it up and for ease, put the back forward too
    Step 3: Slide up the seat belt panel
    Step 4: Loosen the clip inside and push it down to detach bottom portion of the belt
    Step 5: Go behind the seat and remove the two rear bolts from the guards
    Step 6: Use a pry bar to remove the push pins underneath the guards
    Step 7: Slide off the guards
    Step 8: Undo the two bolts in the track and remove them
    Step 9: Move the seat all the way back
    Step 10: Remove the same push pin up front, as you did from the back
    Step 11: Undo the bolts from the front track and remove them
    Step 12: Get the seat to the center position of the track and tilt it backwards
    Step 13: Pull panel on the floor off
    Step 14: Pinch the clip to detach
    *Make sure your battery is off
    Step 15: Pull up wiring

    Thanks for watching Wolf Auto Parts’ video! We are located at 135 Nelson Blvd. in Montrose, Minnesota. We are a salvage yard specializing in recycled Audi parts. We take pride in our parts, removing each one from the cars we take in and giving it a thorough inspection and cleaning. For more information about Wolf Auto Parts head over to https://www.wolfautoparts.com/ or call us at 1.612.424.9000.

    Used Parts: https://www.wolfautoparts.com/
    More How-To’s and DIY’s: https://www.wolfautoparts.com/audi-how-to-diy.html
    Subscribe to our YouTube Channel: https://www.youtube.com/user/AudiPartsOnline