https://www.youtube.com/watch?v=cKHQyeq3yQs SEE THIS LINK; THE UPDATED INFO ON THIS FIX.
I’VE REBUILT THE LOW END ON THIS TRANSMISSION NOW AND SHE’S ALL BACK TOGETHER BUT CAN’T START HER YET THANKS TO A P.O.S. SCHUMACHER BATTERY CHARGER THAT IS NOT REALLY CHARGING ON A NEW BATTERY SHIPPED DEC2013.
you’ll need a welder to make a spot weld on the tip of the pin. Use a caliper to measure the pin first, so you’ll know how much to grind off later if you do a total rebuild or just low band replacement job.
You’ll need a large oil pan, 10mm, 8mm sockets, both of which you’ll need on a 1/4″ drive using a 3″ extension( or less maybe), the 1/2″ drive is for the 10mm sockets and you will need some extensions. Now there is a problem with accessing 2 of the bolts on the rear of the pan, so for that I used a 3/8″ drive and a 10mm easy out, since those are on tight and like to strip !!!!!!! (maybe because of the angle you’ll need to get in there thanks to GM’s professional grade engineering haha).
And a JACK with a large 12x12x24″ block of solid strong wood or something similar. I used jack stands only as safety but they had no load on them.
That should cover your tools, but don’t forget you’ll need a filtering funnel that will fit into the refill hose in the engine compartment near the firewall.
Know the difference between the engine oil and the transmission fluid. Use only dextron mercon 3 synthetic or just the best you can find. Also it’s good to add Lucas.
I reused most of my oil, I added a new quart. I had it flushed 3000 miles ago and added Lucas.
It can look a little dirty but you don’t want it laquered or dark brown. If there is no color red that’s easy to spot right off the bat, replace that nasty oil immediately.
Always have a magnet stick incase you drop parts into the oil pan also.
Samson Heavy Duty Shower Glass Door Hinge has been designed for large elegant glass doors. A set of two Samson door hinges can carry 175 – 200 lbs. with a hidden screw look. Snap on covers will provide a total concealment of all screw fasteners and the offset base plate allows the door to mount flush to the face of the glass, providing every shower a very clean, streamlined appearance.
Features of this exceptional door hinge!
• Can Carry 175 – 200 lbs. per pair.
• Adjustable zero position
• Double action
• Fully covered screws
• Clip-on system
• Tested for over 100,000 cycles
• Anti-slip gaskets for safety
• Minimum sight-line gap
• Slotted holes for leveling
• Time saving installation
Please contact our helpful sales staff for additional information on this new product!
At PRL we never stop innovating….!
https://prlglass.com/Shower-Hardware
PRL Glass Systems, Inc.
13644 Nelson Ave,
City of Industry, CA.
91746
Toll Free 800-433-7044