A 5/8″ diameter A325 steel bolt tested in tension. This is one of the first test runs for the Abaqus model.
PET BOTTLE NECK PIECES which are cut during grinding of PET BOTTLES command higher price in market compared to PET BOTTLE FLAKES due to the reason that it has higher BULK DENSITY which has many advantages while processing PET BOTTLE FLAKES to make many products such as Fiber, Yarn, PET SHEETS, PET BOX STRAPS, Etc…… There isn’t any proven high speed technology yet developed which can separate PET BOTTLE NECK GRINDINGS from crushed PET BOTTLE FLAKES.We, having long standing experience of manufacturing PET BOTTLES FLAKES have developed in-house technology (for our own usage) to separate PET BOTTLE NECK GRINDINGS from PET BOTTLE FLAKES. In past, many have tried to cut BOTTLE NECKS before these P.E.T. bottles go for grinding. This did not work for the cost consideration. The cost of cutting BOTTLE NECKS from PET BOTTLES before grinding of entire bottles is very high. In this video, commercially successful separating machine is being shown which separates around 97% of PET BOTTLE NECKS from Washed PET BOTTLE FLAKES. It also has an another function of separating FLAKES by its sizes. This operation is also incorporated in ONE SINGLE machine which will not only separate PET BOTTLE NECK GRINDING from PET BOTTLE FLAKES but will also separate PET BOTTLE FLAKES by its sizes as seen in the video.