https://www.etrailer.com/SnowSport/A60140.html
Today on our 2005 Honda TRX 350 four wheeler we'll be installing the Snow Sport Agri-Cover 2 inch ATV Trailer Hitch Receiver. Part #A60140. We need to first remove the two bolts that hold the original hitch in place. We'll be using a wrench and a socket to do this. We'll need to hold the nut on the underside as we turn the bolt from the top side. We'll go ahead and remove both of them and then we can pull the original hitch off. We will not be reusing the factory hardware. Next we'll take our new receiver and put the large bolt that's welded to it through the ball mount of our original hitch. We'll then put the 3/4 inch nut on finger tight.
Note: Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
https://www.cjponyparts.com/trans-dapt-performance-valve-cover-bolt-chrome-1-4-hex-set-for-aluminum-valve-covers-260-289-302-351w/p/HW1346/
This Set of Trans-Dapt Performance Chrome 1/4″ Hex Head Valve Cover Bolts is for all 260, 289, 302 and 351W Engines with Aluminum Valve Covers.
Replacing your valve covers? Installing an original set? Trans-Dapt knows you want the best, that’s why they use high end materials to bring you quality automotive products for your classic Mustang or Bronco.
These direct replacement valve cover bolts fit into your small block V8 from 1965-1995. This set of four bolts is great for restoring your classic Mustang or Bronco engine. You will need three sets to do both valve covers on your 260, 289, 302 or 351 Windsor engine.
Check out more Mustang Engine Hardware from CJ’s here:
https://www.cjponyparts.com/mustang-engine-hardware/c/60060150/
Check out more Trans-Dapt Performance Products from CJ’s here:
https://www.cjponyparts.com/trans-dapt/c/8_1001_179/
Subscribe to CJ Pony Parts on YouTube here:
https://www.youtube.com/subscription_center?add_user=cjponyparts