Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
So you are in the middle of doing your hitch installation and you are in the process of taking out one of your existing factory bolts. In the process you find that the bolt is not coming out due to the fact that the weld nut inside the frame has broken. We are just going to go ahead and show you a couple of things you can do to not only get the bolt out of the way but to also go ahead and continue on to be able to put your hitch in position without the weld nut welded inside the frame. The first thing that we obviously need to do is go ahead and get the bolt out of here. There are a couple of different ways you can do this. You can take a chisel, is you have one large and strong enough to do so, and possible grind the head of the bolt off. Or you can actually take a torch and torch it off. And that is actually what we are going to do on this application here. I am going to try to get most or as much of the head of the bolt off as I can. And we will take and push the remaining section of the bolt-weld nut combination up inside the frame. 0:49
Empresa CPF Parafusos, Referencia em Parafusos estojos ASTM A193 Gr. B7, B16, B8, B8m, ASTM A320 Gr. L7, Porcas ASTM A194 Gr. 2H, 4, 4L, entre outras ligas!